• How to Fix Driver PNP Watchdog BSOD on Windows 10

  • Back
 by 

The “Driver PNP Watchdog” BSOD error is the same as the “driver irql not less or equal” error, and it occurs when a Windows 10 machine fails to start properly. The error message seems to suggest your computer is having trouble communicating with your network or video drivers, but the real problem is usually a defective device driver. Driver PNP Watchdog errors can also appear when you install faulty or outdated hardware drivers. Blog Intro Sample: In the past, the most common way to fix a Driver PNP Watchdog BSOD error was to roll back your network and video drivers to the version that came with Windows. However, that’s not always possible when your hardware manufacturer releases new drivers.

After a few updates, you may receive a “DRIVER_POWER_STATE_FAILURE” error message on Windows 10. This usually occurs when you switch the computer on, and the screen stays blank, or you get a black screen with white or blue text error message. This article will explain the causes and solutions to this problem.

To know how to fix BSOD Error PNP watchdog driver in Windows, this article can be a good source of information.

Recently, many users have complained about the blue screen of death. It’s the pilot’s PNP watchdog. Like other errors of this type, it can prevent Windows from booting normally. As a result, troubleshooting can be more difficult. However, it’s not so impossible to fix that blue screen of death. Some resources have made this possible.

Possible causes of blue screen death for PNP watchdog pilot

In fact, the PNG driver watchdog is a stop code error caused by a driver error. But more complex things can sometimes cause this error. This may be due to conflicts between third-party software, hardware problems, etc. However, here are some of the most common causes of this problem.

  • Incorrect BIOS settings, especially for SATA configuration
  • The problem of viruses and malware
  • Third Party Security Software
  • Defective or missing system components
  • Memory problems
  • Outdated or faulty drivers

Here are the most common causes that can cause this stop code error. But don’t worry. This article explains how you can easily get rid of this mistake.

How to fix the blue screen of the Watchdog PNP driver on Windows 10

If you are already experiencing this problem, there are a few things you can do. Before proceeding, disconnect all external devices except the keyboard and mouse. See if that helps. Anyway, here are the 14 most effective troubleshooting methods to solve PNP driver BSOD.

1. Check the BIOS settings, especially the SATA configuration

If you have recently changed the BIOS/UEFI settings, you must undo the changes. This might solve the problem. However, if you don’t remember what changes you made to the BIOS settings, you need to check and correct your SATA configuration. You can also restore the default settings. Anyway, here are the instructions.

  • First, turn off the computer.
  • Then press the power button.
  • If your monitor starts displaying something like the motherboard brand logo or something similar, press F12/Del/F2. Which button you press depends on the brand of the motherboard.
  • The UEFI or BIOS settings will open. Just navigate to the appropriate options to find the SATA configuration.
  • Now adjust the SATA settings. You can choose between the options to see which one is correct.
  • Then save the settings and restart the computer.
  • You can also reset all settings to their default state.

This should solve the blue screen of death problem.

2. Update all drivers

Since incompatible or faulty drivers can cause this problem, you can try this method. In fact, in many cases, this is the best solution to resolve the PNP Watchdog driver error code.

However, updating the drivers can be another challenge. You may have hundreds of drivers installed on your computer. It is almost impossible to manually check and update them all one by one. I recommend you to use Driver Booster or Driver Easy or Driver Genius. These tools can automatically check for driver updates and update them with a single click.

However, if you want to do it manually, you can follow the steps below.

  • First open the Start menu, type devmgmt.msc and press Enter. The Windows Device Manager opens.
  • You will then see a list of drivers. Right click on one of them and select Update Driver.

I hope this method helps you solve the PNP watchdog driver problem for the blue screen. Otherwise, follow these methods.

3. DiskShadow Copy Service Control

This is another commonly used method to solve this BSOD. Windows, especially Windows 10, has many services that make for a smooth experience. However, if for some reason they stop working, it can lead to problems such as. B. Stop code errors may occur. The Volume Shadow Copy Service (vssvc.exe) is such a service. To troubleshoot the PNP driver watchdog, make sure the service is active and configured correctly. To do this, here are some steps you can take.

  • First open the Start menu, type services.msc and press Enter.
  • Now find the shadow copy of the disk and double click on it.
  • Then set the startup type to Automatic in the properties and click Start to activate the service.
  • Finally, click Apply and OK and restart the computer.

If you’re lucky, this may eliminate the blue screen of death.

4. Updating Windows

If Windows on your computer is very outdated, this may be the cause of the problem. To avoid this kind of confusion, I suggest you upgrade to the latest version of Windows. It can fix the PNP watchdog driver, as well as other errors.

5. Complete computer virus scan

This problem may be caused by a virus or malware. Therefore, you should run a full system scan on your computer. In this case, I recommend you use a powerful antivirus program. You may also want to consider antivirus programs such as Malwarebytes, MalwareFox, Hitman Pro, Malware Fighter, etc.

6. Clean boot

Third party programs such as anti-virus, firewall or other services may cause this BSOD. So I suggest you temporarily uninstall your antivirus program to see if that helps. Moreover, a clean start must be made. This will help you understand which third-party software is causing the problem. If you find such a program, uninstall it.

7. Clean junk files and repair the registry

This is another way to solve BSODs for the PNP watchdog driver. You can use CCleaner or Advanced SystemCare to clean up unwanted files. This tool can also repair a damaged registry. But before you do that, you need to make a backup of the registry.

8. Renaming the software distribution directory

Generally, people use this method to fix Windows update errors. But you can also try this method. This can help you get rid of PNP watchdog driver bug code. If you are not familiar with the procedure, read on: To reset the SoftwareDistribution directory

However, after renaming this folder, you must perform the following steps.

  • First, press Win + X or right-click on the Start button.
  • Then click on Windows PowerShell.
  • Now execute the following command.

wuauclt.exe /updateow

  • Finally, restart the computer.

This may solve your problem.

9. Uninstalling a problematic Windows update

In some cases, users may experience problems with the Watchdog PNP driver after the Windows update. This can mean many things. But the most common perception is that upgrading Windows is problematic. In such a situation, you may blindly consider uninstalling the update to solve the problem. In fact, if you have software like IObit Uninstaller, it will be very easy to remove the update. However, if you want to do it manually, follow the steps below.

  • First, go to Windows 10 Settings > Updates and Security > Windows Update > Update History.
  • Now click on the Remove Updates button.
  • Then select the one you want to delete and do so.

10. Error correction disk

In some cases, fundamental problems with the hard drive can cause this BSOD. So, to fix the PNP watchdog driver, I recommend that you fix these hard drive problems. The chkdsk command can be used for this. Read more: Troubleshooting the hard drive

11. Restore damaged system files

If some system components are damaged, this problem may occur. You must therefore take the necessary measures. SFC and DISM are two common commands that can be used to troubleshoot. In this case, I recommend you read: To recover damaged system files

12. Troubleshooting memory problems

If the problem persists, this may be an alternative to fixing the PNP watchdog driver. You can take steps to fix RAM problems. If there is indeed a memory problem, this will solve the problem for good.

13. PNP watchdog driver dump file analysis

This is probably the best way to fix the blue screen of death if the first 12 didn’t help. The memory dump file contains a lot of information about the bluescreen error. If you can analyze it, you can determine the exact cause of the problem. This way, it is easier to take the right troubleshooting steps to fix the PNP watchdog driver. For more information, read : To analyze a small memory dump

14. Reset Windows

If all else fails, this is probably the last thing you can do. Just reinstall Windows. This should solve the problem.

These are the most effective ways to solve problems with the PNP watchdog driver. However, if you know of another way, please mention it in the comments section. This will help others.

This source has been very much helpful in doing our research. Read more about driver pnp watchdog bootcamp and let us know what you think.

Frequently Asked Questions

What does driver PNP watchdog mean?

The term driver PNP watchdog is one that you may have heard thrown around the internet a few times, but you might not be sure what it means, or why it’s important. While a relatively new term, the concept of a PNP watchdog goes back as early as the 1980s, when Windows was first starting to be used to write applications and software. If you would like to see how I did when I graded myself, please go to the “How I Scored” section. There are three types of CPU’s, x86, x86-64, and ARM. x86 and x86-64 have been around for over 30 years, while ARM is a lot newer. It’s a 32-bit RISC CPU. They are very similar. Both have the same core capabilities. However, ARM can be found in mobile devices, embedded systems, and low power devices.

How do I fix watchdog Sys blue screen?

Step 1: Set your PC into the Windows 10 Safe Mode . In order to do that, as soon as your PC is turned on, keep pressing F8 until Windows Advanced Options menu is displayed on the screen. Then, select Safe Mode with Networking. Appendix 1: “The Business Case for Using Dialogue Tags” In this appendix, I provide evidence to support my claim that dialogue tags are semantically redundant. I show that tag omission results in systematically different discourse patterns than the patterns found with the corresponding inclusion of tags. I argue that these differing discourse patterns can be explained by a model of grammatical parsing in which the presence of a dialogue tag cue results in a higher-level syntactic analysis than would be reached without the cue Restarting Windows usually fixes watchdog sys blue screen problems. Press the Windows key + R to open the Run box. Type “msconfig” and press Enter to start the System Configuration utility. From the System Configuration screen, click on the Boot tab. Under Boot Options, check the box next to “Safe Boot.” Click OK to save the changes and restart the computer.

How do I fix the blue screen loop in Windows 10?

As many Windows 10 users can tell you, the operating system is not immune to BSOD errors—in fact, one of the most commonly reported problems with the OS is the dreaded “blue screen of death” (technically known as a STOP error). These crashes typically occur when Windows encounters a critical error that it can’t recover from, which can happen for a variety of reasons, ranging from a faulty application, a bad driver, or a hardware malfunction. Once the error appears, Windows 10 typically attempts to shut down your computer to prevent the damage from spreading—a process that may take several minutes, or even longer on older hardware. The blue screen of death (BSoD) is an error screen displayed on Microsoft Windows and other Microsoft Windows compatible computers when a critical error occurs, wherein the system halts and displays the text “Stop Error” followed by a hexadecimal number. It is commonly known as the Blue Screen of Death and, before Windows Vista, was associated with the Windows 95/98/ME bug check screen which displayed format C:\WINDOWS\system32\hal.dll, which was considered a bug. The BSoD is often caused by bad memory, a corrupted driver, or a faulty device. The BSoD is a common occurrence in Windows operating systems for many reasons.

Related Tags:

Feedback,driver pnp watchdog windows 10 2004driver pnp watchdog boot loopdriver pnp watchdog bootcampdriver pnp watchdog error fresh installdriver pnp watchdog windows 10 1903driver pnp watchdog vmware,People also search for,Privacy settings,How Search works,driver pnp watchdog windows 10 installation,driver pnp watchdog windows 10 2004,driver pnp watchdog boot loop,driver pnp watchdog bootcamp,driver pnp watchdog error fresh install,driver pnp watchdog windows 10 1903,pnp watchdog error in windows 10 unable to boot,driver pnp watchdog vmware

Leave your comment

Your email address will not be published. Required fields are marked *